Related Products
Thanks to its excellent performance/price ratio, X2 is the ideal instrument for applications in which monitoring and controlling the incoming/outgoing flow of people calls for a simple and user-friendly solution.
FUNCTIONS
X2 is equipped with a large, bright display that clearly indicates: time, transaction type if configured, direction and result of the transaction (the latter is also indicated by means of an audible signal), and all controls and settings available on the supervisor menu.
The terminal is available with different reader technologies; the radiofrequency reader is in-built and is available in the 125KHz EM4102, Mifare®, Legic® and HID® versions, while the barcode, magnetic stripe and biometric readers are fixed to the underside of the terminal by means of a bracket.
In addition to the main reader, it is also possible to connect a second external reader with the same technologies.
The keypad is made up of 6 membrane function keys on the sides of the display and 10 numeric keys. It can be used to enter a reason code, to digit a PIN and to perform the service procedures.
An external USB port enables the user to copy the recordings to a USB stick in cases, where no communication with a host is possible.
The internal battery ensures autonomous operation even in the event of a mains power failure. PoE (Power over Ethernet) 802.3.af is a standard feature and makes the system easier to install.
The communication facility consists of an Ethernet 10/100 PoE port with TCP/IP HTTP protocol for communicating with the server and FTP protocol for transferring transactions and configuration parameters.
An optional built-in module is available for GPRS-GSM communication.
The I/O section consists of 1 internal relay that can be used to unlock an access point or to activate sirens at programmable times. An optional external card is also available, equipped with 2 relays and 2 digital inputs, which maximises the security of an access point since it can be installed inside the protected area, thereby rendering the access commands inaccessible and leaving only the terminal itself exposed to tampering.
The X2 in your firm’s colours
The X2’s removable cover is available in a wide range of colours. Please ask your commercial contact for more information.
X2 with fingerprint reader
X2 with magnetic reader
- Keypad
• 6 membrane function keys on the sides of the display
• 10 membrane numeric keys (to enter a reason code, a PIN service procedures…)- Display
Transflective, affords excellent visibility even in full daylight
128x64 white LED, up to 7 lines and 24 characters- Integrated Readers
1 internal (RFID 125KHz, Mifare, 13.56 MHz multistandard, Legic, HID)
- Auxilliary Readers
2 external
- Communication Ports
• Communication: TCP/IP, HTTP and FTP
• Ethernet : 10/100 Mb/s PoE
• GSM - GPRS: Optional
• USB and SD: 1 internal MicroSD (1GB), external host USB- Input/Output
1 internal relay 1A, 30V DC (resistive load), can be used for programmed activations (siren) or for unlocking an access point
2 internal digital input
Optional: remote expansion card with 2 relays 1A, 30V DC and 2 digital inputs (NeoMAX)- Power Supply
PoE 802.3.af or from 9 to 50 Volt
- Battery
1 h continuous operation with automatic power-off facility
- Software interface
Interfaceable with XAM middleware to implement and deploy advanced installations in the shortest time
- Physical Characteristics
Protection: IP55
Housing material: ABS V0
Dimensions: 120x130x52 - HxWxD
Weight: 400gr.
Temperature: -10 +50 (battery must not exceed 50°)- Audio & Video
Multi-tone buzzer
- Memory
More than 10 million transactions and more than 100.000 users
