Home > Terminals > TRAX+G

TRAX+G

Programmable Ethernet Terminals for Data Collection, Time & Attendance and Access Control

EtherTRAX+G with RF reader

929 TRAX+G is a family of data collection terminals designed to satisfy your need to monitor the activity of production personnel and operating machinery, as well as provide you with full attendance recording and access control capabilities in offices, factories, hospitals and work sites. 

All main communication and Auto ID technologies are offered incorporated in different versions.

Overview

• Easy to use: TRAX+G terminals meet the growing demand for easy interfacing to existing LAN’s or WAN’s , which are nowdays considered standard both in the industrial sector and in all office applications. 
• Best price/performance ratio: Easy to mount, TRAX+G is without doubt the most cost-effective and practical solution .

Main features

:: Integrated Ethernet/IP Interface with P.O.E (Power over Ethernet) support. Allows the simplest wired installations. 

:: GSM: this version allows communications via GSM data sessions, or in/out sms or upgrade upon request. 

:: WLAN 802.11b: this version enable you to use TRAX+G in environments with WiFi Internet coverage.

• Internal magnetic, barcode or proximity (RFID) card readers : with a wide range of technologies:
- 125 KHz r/o versions, EM4102 comp.
- 13.56 MHz R&W for ISO14443A/B tags (e.g. Mifare and others), or read-only ISO15693
- LEGIC® for prime proprietary and advant ISO15693/14443A cards
- HID 125 KHz

• Analog Modem version (speed: nominal 19200bps, 38400 compressed) provides greater communication convenience. 

FingerTRAX+G with magnetic reader

• Time & Attendance and Access Control firmware included . 

• Script interpreter for customized data collection procedures. 

• Compact and elegant design, appreciated when space saving is important such as on a work bench or in a reception area. 

• Wall/pole or table mounting thanks to reversible casing top. Optional floor mounting “pole”. 

• Robust, splash/dust proof casing, IP65 (except for barcode version). ABS-VO fire resistant casing. Connector cover and wall support are in aluminium. 

• Mounting, maintaining and moving the terminal is made easy thanks to the special bracket supplied with the terminal and thanks to its extractable connector block . 

• Wide configurability with 99 parameters both from the keyboard and communication channels. 

• File system based memory allocation. 

• Off-line , autonomous mode using its standard FW or internal procedures (supplied by your Systems Integrator) or on-line real time operation under the control of the host computer. If the host does not reply within a user-defined time limit, the terminal automatically goes into off-line mode. 

• Automatic programmable shut-down in the event of a power supply failure . The terminal can retain its data for two months. The battery ensures up to 6 hours functioning time (magnetic reader versions). It is programmable to turn off after a number of minutes. 

Functionalities

• Attendance Recording/Access Control firmware:
» validate transactions by user group and time zones
» allocate description codes for different transactions
» record the attendance of a non card-holder under the authorisation of another person who is a card-holder
» review all the transactions of a single user
» display messages and data prepared by the controlling computer

• You can define a vast variety of interactive, events-driven data collection transactions : the correctness of data can be checked by means of prompts to the user and data validation tables. The user can make choices from an interactive menu, the terminal will make a print-out or activate a relay on the basis of the data introduced. You can include the value of the counter on the optoinsulated input line.

• Each transaction can be controlled by a procedure previously loaded onto the terminal and activated using the function keys. You can move from one procedure to another on the basis of the data collected from the keypad, or from the barcode, magnetic or proximity card readers. The procedures can also be activated at a set time on a set day of the week. 

• The management of data, procedures, and configuration parameters, either from a remote computer or via the keypad, is extremely flexible thanks to the memory based on a file system and its powerful set of shell commands , accessible via RS485/NET92, serial, Ethernet or wireless connections. 

• Customers specific applications can also be written in “C” and downloaded into Flash Memory, extending or replacing the standard functions.

Software Support for TRAX+G

Free downloads from the Partners Area on our web site http://www.axesstmc.com

• Ethertest and TMCDLL Demo: for immediate remote configuration of TRAX+G parameters and terminal testing. 

• OCX (Etherctrl.ocx / EtherCtlTest.exe ): for developing your on-line/off-line applications. Demo program in VB6 for evaluation and testing. 

• DLL’s (Proxc.dll / TMCDLLdemo.exe)

• TraxIT (TraxIT32.exe) : a complete application for the remote configuration of TMC terminals in different installation types and for batch communication sessions.

New: Functional upgrades features

• TRAX+G Versions with RS485/RS232 interfaces only can be upgraded to Ethernet/IP by purchasing optional SW activation key (standard on all FingerTRAX and EtherTRAX versions). 

• Also NET92 Master capability can be activated bu purchasing optional SW activation key. 

• Other FW options (i.e. Wiegand compatibility, external GSM modems, etc.) are also available by purchasing optional SW activation keys.

Technical specifications