FD-WA01
Standard Wiegand Interface - 4 units DIN rail
Functional characteristics
The FD-WA01 allows to connect any third party’s reader with a standard wiegand interface output. With FD-WA01 an existing Access Control system can be replaced by OrangeLink saving the already installed readers. The FD-WA01 can also be used to integrate into the OrangeLink system particular readers for specific applications like long range proximity readers, readers fo very harsh envinroment, explosion proof readers, etc.
The FD-DA01 can be easely configured by the XAtlas software to read standard 26 bits wiegand format or other configurable formats.
• Can be mounted on DIN rails
• Visual fault and/or alarm indication
• Connection to FD-BUS through an RJ45 connection
• Double RJ45 connector (internally in parallel) for easy reconnection to the FD-BUS.
• Galvanic separation of the FD-BUS backbone from the local reference ground
• 1 wiegand input
• 3 open collector output sto connect leds and buzzer of the connected reader
• 1 tamper input from the connected reader
• Power supply to the connected reader (12 Vdc, 500 mA)
Protection
The equipment is protected against the following events:
• polarity reversal on the cables (RJ45) connecting to the FD-BUS
• voltage surge in the power supply
• negative voltage peaks at outputs with inductive loads
Modes of Operation
• The FD-WA01 module is part of the Orangelink system and can perform the data acquisition functions from any reader with a standard wiegand output. It has also three outputs to control the leds and buzzer of the connected reader. The wiegand interface can be programmed to accept the standard 26 bits format or the 35 (Corporate 1000 HID®), 37, 40 bits formats.
Visual indicators
The FD-WA01 module can give the user indications by means of:
• a red LED
• a yellow LED
• a green LED
The most common indications are as follows:
• Green LED, lit steadily when in operation
• Red LED, lit steadily in the event of an alarm and/or fault
• Yellow LED, flashes during communication (one flash per message)
Technical specifications
| Power Supply | Internal circuit:
optically isolated section on FD BUS:
|
| Interface Hardware | Power supply input
|
| Physical Characteristics | • Working temperature: 0 to 50°C
|
| Audio & Video | Alarm LED (red)
|
| CPU | P89C662 Philips at 11.0592 MHz |
Request more information
If you would like more information on this product please fill in this form. Please make sure you include your name and contact details or we will not be able to get back to you.
Information request on: FD-WA01 |
*Required field |
Privacy Statement. Zucchetti Axess guarantees that the information you submit will be treated in the strictest confidence and in accordance with Italian legislation on data management (Legislative Decree n. 196 of 30 giugno 2003).
