FD-RBOx
Bidirectional 13.56 MHz (Mifare®) reader/writer
Functional characteristics
The FD-RB01 and FD-RB02 are card reader modules which can read and write data to MIFARE® contactless cards with the following characteristics:
• Able to energize MIFARE® cards at 13.56 MHz at a distance of about 2 cm from the antenna (antenna is located bottom center of the reader)
• Able to read and write data on MIFARE® cards
• Communication with cards that carry data encrypted according to the MIFARE® protocol
• Read data registration (entry/exit) by means of photo sensors on the left and right of the reader
• Visual indications through 2 multicolored LEDs (red/green/yellow/blue) in the little arrow symbols on either side of the reader
• Indication of a field present by sequential illumination of the blue wave symbols on either side of the reader
• Audible signal through an internal buzzer
• Connection to the FD-BUS using SPP (Serial Proprietary Protocol) at a speed of 115.2 Kbaud (default) or 19.2 Kbaud
• Address selection for the reader by means of a rotary switch on the back of the device
• Double connector (internally in parallel) for easy reconnection to the FD-BUS.
Only FD-RB02
• Display of alphanumeric information on an LCD display, on 2 rows of 16 characters with BLUE backlight
• Automatic disabling of the display backlight to save energy when operated from the battery
Protection
The equipment is protected against the following events:
• polarity reversal on the cables (RJ45) connecting to the FD-BUS
• voltage surge in the power supply and data lines
Modes of Operation
The FD-RB02 module can read MIFARE® contactless cards in registered and non-registered mode.
• In registered mode (entry/exit for attendance registration), the MIFARE® card is read by presenting the card at the luminous wave symbols on the left or right of the reader.
• In non-registered mode (access control) the MIFARE® card is read by presenting the card at the center of the reader.
Visual indicators
The FD-RB02 module can give the user indications by means of:
• alphanumeric LCD display
• 2 multicolored LEDs located in the arrow symbols
• blue LEDs in the wave symbols
• buzzer
The most common indications are as follows:
• When switched on, the module displays the address previously set with the rotary switch.
• If there is no polling from the Field Manager, the module displays the message “No communication” and both arrows flash yellow.
• When the module receives the configuration from the Field Controller, the blue wave symbols on either side of the reader begin flashing.
• On access grant, the arrow symbol corresponding to the direction of passage is lit green. and an audible signal is given.
Technical specifications
| Display | Alphanumeric display, 16x2 with blue backlight (FD-RB02) |
| Power Supply | Through the FD-BUS connectors |
| Hardware Interface | FD-BUS (2 RJ45s in parallel) with RS485 and power supply |
| Physical Characteristics | • Working temperature: 0°C to 50°C |
| Audio & Video | 2 multicolored LEDs (red/green/blue) in the arrow symbols on either side |
| CPU | FD-BUS (2 RJ45s in parallel) with RS485 and power supply |
Request more information
If you would like more information on this product please fill in this form. Please make sure you include your name and contact details or we will not be able to get back to you.
Information request on: FD-RBOx |
*Required field |
Privacy Statement. Zucchetti Axess guarantees that the information you submit will be treated in the strictest confidence and in accordance with Italian legislation on data management (Legislative Decree n. 196 of 30 giugno 2003).
