FD-PAO1
Low-Voltage Power Supply Module 6 units DIN rail
Functional characteristics
The FD-PA01 is a power supply module with back-up battery, It has the following characteristics:
• Designed for mounting on DIN rail
• Able to supply 12V 1.3A
• Able to supply field devices for more than 4 hours when linked to a lead battery with 12V 7.5Ah capacity
• Battery disconnection at 10V for over-discharge protection
• Output can be connected in parallel with other power supplies
• Able to monitor all electrical parameters, including battery efficiency tests, through a special connection to the FD-DA01 module
• Visual On/Off indicator for main power supply
• Fault and/or overload indicator
• Connection to FD-BUS through an RJ45 connection
Double connector (internally in parallel) for easy reconnection to the FD-BUS.
Protection
The equipment is protected against the following events:
• polarity reversal on the cables (RJ45) connecting to the FD-BUS
• voltage surge in the incoming power supply
• temporary short-circuit on the output
Modes of Operation
The FD-PA01 module supplies the power for the Orangelink system.
• In limited monitoring mode (for access control and attendance registration), power is supplied directly to the Orangelink devices through the FD-BUS outputs and/or through the output terminal.
• In the extended monitoring mode (for intrusion protection, access control and attendance registration) power is supplied through the output terminal only, and one of the FD-BUS connectors is used to supply the remote monitoring signals to an FD-DA01 module.
Visual indicators
The FD-PA01 module can give the user indications by means of:
• a red LED
• a green LED
The most common indications are as follows:
• Green LED, lit steadily when main power is On
• Green LED, flashing when main power is Off
• Red LED, flashing in the event of an overload (overvoltage or overcurrent)
• Red LED, lit steadily in the event of a fault (no voltage at output) or if power is about to go off.All indicator signals are generated locally.
Technical specifications
| Power Supply | Power consumption (for Iout=1.5A)
Input voltage
Output voltage
Output current
Fuses
|
| Interface Hardware | Indirect terminal blocks for cables up to AWG12
|
| Physical Characteristics | • Working temperature: 0 to 40°C (ventilation by natural convection)
|
Request more information
If you would like more information on this product please fill in this form. Please make sure you include your name and contact details or we will not be able to get back to you.
Information request on: FD-PAO1 |
*Required field |
Privacy Statement. Zucchetti Axess guarantees that the information you submit will be treated in the strictest confidence and in accordance with Italian legislation on data management (Legislative Decree n. 196 of 30 giugno 2003).
